Plan sheets, screws, tape, and mud.

Drywall Calculator

Calculate drywall sheets and supporting materials from total surface area and your preferred sheet size.

Free to useNo sign-upWaste included
Your measurements
sq ft
ft
ft
%
Recommended—
Project area—

Enter your measurements and calculate.

How to calculate

The formula, made practical

Sheets = total surface area × waste factor ÷ sheet area. Supporting materials use practical planning ratios per 1,000 sq ft.

Example: For 1,000 sq ft using 4 × 8 ft sheets and 10% waste, buy 35 sheets, about 1,000 screws, 350 ft of tape, and 5 gallons of joint compound.

Material ratios are budgeting estimates. Fire, moisture, fastening, and assembly requirements must follow code and the panel manufacturer's instructions.

Quick reference

Common drywall sheet sizes

SheetCoverageCommon use
4 × 8 ft32 sq ftGeneral remodeling
4 × 10 ft40 sq ftFewer wall seams
4 × 12 ft48 sq ftLarge rooms / ceilings
4.5 × 12 ft54 sq ft9 ft ceilings

Common questions

Drywall Calculator FAQ

Does this drywall calculator include waste?

Yes. The default result includes 10% extra for cuts, breakage, color matching, and future repairs. You can change the waste percentage to match your project.

How many drywall sheets do I need?

Divide total wall and ceiling area by the sheet area, then add 10% and round up. Complex rooms may need 15%.

How many screws per sheet of drywall?

A planning allowance of about 32 screws per 4 × 8 sheet is common, but framing layout and local fastening schedules control.

How much joint compound do I need?

A rough planning allowance is 4.5–5 gallons of ready-mix compound per 1,000 sq ft for three coats.

Does sheet orientation matter?

Yes. Orientation affects seam count, backing, and waste. Follow local code and the board manufacturer's installation instructions.